Neptune 4 Plus Improved Y Tensioner (Gates/Runice Pulley with 9mm belt)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved Y Tensioner for Neptune 4 Plus to fit a Gates/Runice Pulley with 9mm Belt.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remixed/modified N4+ Y tensioner model from clogged_nozzl3, which was based on SilencedFrost's (SF) X tensioner.
Modified to fit 14mm wide Gates/Runice Pulley running with 9mm GT2 belt. Pulley is secured with a 22mm Dowel Pin like in SF's design.
Due to concerns on the thickness of the initial tensioner being too thin to cater for the stock front cover, a thickened tensioner was added in conjunction with a Front Extrusion Mod that allows the use of it.
The Front Extrusion Mod can be found here:
[WIP]
IMPORTANT NOTE: ONLY FOR NEPTUNE 4 PLUS!
| Iteration | Remarks |
| V1 (14 March 2025) | Model Beta release, actual test absent. Proceed with care! |
| V2 (17 March 2025) | Beta release, modified side grooves for correct fit. |
| V3 (19 March 2025) | Beta release, adjusted overall dimensions for better fit. |
| V4 (24 March 2025) | Beta release, added thickened version for Front Extrusion Mod |