1 / 3
Kobra S1 Waste Basket magnetic - Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remixed version involving 2 pcs of Ø10x5mm neodym magnets for eay attach and release to the backside of the printer
- Ocena
- 4,75 / 5
- Polubienia
- 31
- Pobrania
- 481
- Wydruki
- 5
- Wyświetlenia
- 1923
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 7)Remiksy (0)Kolekcje (51)Powiązane
due to limited space behind the printer and unwillingness to use the proprietary screws i made a megentic version where the magnets are actually sitting in the parts and are not attached by duct tape.
I printed with 0.2mm PETG
no supports necessary, just added a small brim
use neodym magnets 10x5mm, cost about 25 cents each, I had laying around
