1 / 7
Cutter / MDF edge trimmer / Refilador de borda MDF
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cutter / MDF edge trimmer / Refilador de borda MDF
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
- Print Orientation
- Print vertically to ensure the best quality of the angles.
- Print Configuration
- "Cover" and "Body" files: Printed in ABS (PLA should work too) with a layer height of 0.2 mm and 50% infill.
- "Bolt" and "Nut" models: Printed in ABS (PLA should work too) with a layer height of 0.1 mm and 50% infill.
- Fixing
- The cover was fixed using a 40x16 mm screw. Other screws with similar dimensions may also work.
- Blade
- Will work well with 18mm blades
