Pour spout for Smooth-On bottles (Moldstar, Smooth-Cast, Mold Max, etc)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screws onto trial size Smooth-On bottles and provides a pour spout + stir stick scraper.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a screw-on pour spout for Smooth-On's trial size bottles, with a 53-400 neck finish (bottle thread.)
The spout lets you pour precisely without product dripping down the side of the bottle, and the flat on the opposite side lets you scrape off a stir stick and return the excess to the bottle. This idea came from doing relatively small silicone mixes and not wanting to waste product or make a mess.
They are reusable. I recommend printing them in different colors (ideally yellow and blue) to avoid mixing part A and part B up. You will probably have to store them in something airtight.
There are 3 versions:
- Unlabeled
- “Part A” text
- “Part B” text
The trial sizes are the ones that are the least expensive SKUs, with the bottles that hold about 450 g / 1 lb of product each (about a pint or ½ a liter.)
This MAY fit other bottles with a 53-400 neck finish; please let me know if it fits other things like SLA resin bottles.