Headboard shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a shelf that mounts onto the headboard of my bed.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 1243
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
Shelf and cupholder I made to mount onto the headboard of my bed. I have included the .stp and .f3d files for the shelf. I can do the same for the cupholder, if there is interest.
The stl is very unlikely to fit your headboard unless you happen to have the exact headboard I do. I do not know the model of headboard. You can edit the dimensions of the shelf using the parameters in the .f3d file or you can edit the body using the .stp file. I printed the shelf on its side using an 0.8mm nozzle at 0.5mm layer height with supports enabled. The parameters in the .f3d file are poorly named, but I tried to explain what each parameter does in the comment.
The cupholder prints in two pieces. I wanted to print the cupholder attachment part on its side to get the strongest layer orientation for the forces that would act on the part. The cupholder itself prints upright as it would sit if you were you using the cupholder. Supports are needed on both parts.