Prusa Enclosure Double PTFE Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Karza's model so it can hold 2 PTFE tubes from inside the enclosure, and also let in 5 tubes from above.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 320
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Here is a remix of Karza's model so it can hold 2 PTFE tubes from inside the enclosure, and also leave enough clearance to allow 5 tubes from above using BuildX's PTFE Tube Gripper!
Now you can select filament from 7 spools at once! 2 in the enclosure and 5 outside.
Be sure to print BuildX's PTFE Tube gripper for the 5x entryway, use this link #0072 [Remix] Prusa Enclosure Top Center Plug - PTFE Tube Gripper (Holder) by BuildX | Download free STL model | Printables.com
For your second spool holder in the enclosure (bottom right): Extra Spool Holder for Prusa Enclosure - Extended Length by Kevin Barker | Download free STL model | Printables.com
And of course you'll need a PTFE feed for your second spool (bottom right): Prusa Enclosure Filament Guides for MMU by bear454 | Download free STL model | Printables.com
I also recommend using these dual PTFE clips to keep everything secure: Pop-in PTFE tube clip for Prusa Original Enclosure by carlmmii | Download free STL model | Printables.com
Happy printing! hope this helps.