Ubiquiti Cloud Gateway Fiber wall mount (UCG-Fiber)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount bracket for Ubiquiti Cloud Gateway Fiber ( UCG-Fiber )
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 537
- Wydruki
- 0
- Wyświetlenia
- 2392
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber).
Gateway snaps into base and is held very tight.
Exposes gateways ventilation slots.
Slot to assist with removal.
If you prefer to have a printed version of the model, please visit my Etsy store at:
https://www.etsy.com/listing/1873548348
Please don't forget to like, rate and comment!
Show us your makes
Printed on MK4
Prusaslicer
*Enable thick bridges*
Layer Height: .20
4 Perimeters
15% or 20% infill (grid). I tested successfully with 15% infill.
No supports needed if thick bridges are enabled.
Further encourage that when slicing that you add a modifier and make the tabs and the area below the tabs have a 100% infill.
Suggest using PETG, or PLA+.
Tabs may be brittle with older filament exposed to humidity.