1 / 6
FryFlow Redirect | Philiphs XXL airfryer — zdjęcie 1
1 / 6

FryFlow Redirect | Philiphs XXL airfryer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An airflow guard for an airfryer if you have a downdraft vent. Designed for the philips airfryer xxl premium hd9867/90.

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
203
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

This is a simple sulution to that problem that everyone has with their airfryer and downdraft vent, when you make fries or something else your intire kitchen will smell like it for the rest of the day. The FryFlow Redirect redirects the airflow straight into your downdraft vent and solves the problem. Designd for the philips airfryer xxl premium hd9867/90.

 

Instalation proses:

  1.  You need to add either isolation tape or aluminum foil to the inside to prevent the PLA warping.(picture 4)
  2. You need to remove the plastic fins at the back vent so that the air won't be puched to the ceiling of the FryFlow (picture 5)
  3. You need to find some kind of glue that can cope with the heat coming from the airfryer, for example I used hot glue and that seems works just fine.
  4. For the best results you should place the exhaust of the FryFlow straigt above your downdraft vent and have it on maximum or nearly maximum power. 

*Disclaimer: this might not work with all kinds of fillament try using something like PLA or something with a higher melting point.

 

Tagi