1 / 2
TurboMocha -the Turbocharged Mocha Pot Holder — zdjęcie 1
1 / 2

TurboMocha -the Turbocharged Mocha Pot Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Want a quick coffee from your mocha pot? Use this to get it in 2 minutes if you have an "instant hot" water dispenser.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

Want a quick coffee from your mocha pot?  Get it in 2 minutes if you have an "instant hot" water dispenser.  Unless you have asbestos hands, you can't put extra hot water into the base of you pot and screw in the top without this holder!  

This model is sized for my half cup Monex Mocha Pot with a parallel sides of the decagonal base measuring approximately 81 mm. You'll probably have to adjust the x-y dimensions for your mocha pot.  

Hint: Print a thin version in the dimensions you think you'll need to make final adjustments.  Just a bit of play in the fit is best.

Tagi