Original Nespresso Coffee Pod Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a tube, that holds original Nespresso coffee pods. Designed (almost) like for like with the original packaging.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a coffee pod tube, designed as per the usual coffee pod tube packaging you see in stores or online that the original nespresso pods come packaged in.
Reason i designed this, is to fit with a dispenser design that i printed some time ago. The dispenser itself is not my model, and if you're interested the link below will take you to it. However, because my model is based on the original sleeve design this should work with any dispenser or nespresso sleeve compatible models.
https://www.printables.com/model/558424-nespresso-capsule-dispenser
So i started buying coffee from “wonky coffee” these pods don't get delivered in the usual tubes, so i designed this box to fit into the dispenser. I added a window so you can see what coffee pods you have loaded and how many pods you have left. I also added a slight cutaway near the opening which helps with coffee pods sliding down and out.
I know what you're thinking. Just keep some of the original boxes and just use those to refill… yeah, yeah, yeah. I just wanted an excuse to print something OK!
Anyway, uploading here in case anyone else find's this useful!
Print settings:
0.2 Resolution
Walls are only 0.75mm thick so no infill required and no supports required
Printed in PLAplus - Eono Black Filament
210degrees
Printed on my CR10-V2