1 / 4
AR15 Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have designed my own AR15 Wall Mount. My design incorporates 2 in-line screw holes for a more secure mount into the wall studs. I did have an issue with my first design where the mag well part of the mount broke away from the wall mount part at the base. So please be careful with your rifles when mounting. I changed to 50% infill and this stabilized everything. I did use supports, but the rest of the settings were defaults. I used PLA for the filament. It is cheaper and there is no issue with temperature where rifles and ammunition are stored. Thanks for looking!!