Festool Systainer 3 S76 inlay template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A building block to create your very own perfectly fitting inlays for the Tanos/Festool Systainer3 S76.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 348
- Wydruki
- 0
- Wyświetlenia
- 1426
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I made this inlay because I liked the format of the Systainer3 S76’s and the OCD in me wanted to create cutouts for all my tools. I couldn’t find any template cutouts that covered most of the nooks and crannies of the Systainers which is why I spent a Sunday and way too much plastic to get just the right fit.
I thought that others might feel the same way so I saved you the trouble.
To lift up the inlay from below, you can insert a hex key in one of the sides (which are not covered by the infill), twist it and then lift the inlay once the outer end of the hex key is in one of the four recesses (as seen in the picture, the print is currently shown bottom up).
If you use these to create inlays that could be useful to others please A. post it online for others to enjoy and B. link back to this template so that even more people get to create their own.