Focusrite Scarlett 2i2 under desk mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an elegant slip-fit and nearly invisible under desk mount for the Focusrite Scarlet 2i2.
- Ocena
- 4,875 / 5
- Polubienia
- 145
- Pobrania
- 1991
- Wydruki
- 13
- Wyświetlenia
- 10 765
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move when inserting/removing an instrument cable, but loose enough to remove the device whenever needed.
This is a 3rd generation 2i2, but the design should fit all devices with the same 175mm x 45mm geometry.
The design comes in the correct print orientation and prints without supports:
I printed it on my Voron 2 in Prusament Galaxy Black ASA, but PETG or PLA should also be suitable. Slice with at least 3 perimeters and at least 40% infill.