Walksnail Avatar HD Pro dual antenna AIO mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All in one mount for the Walksnail Avatar HD Pro dual antenna VTX, camera and antennas.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 209
- Wydruki
- 0
- Wyświetlenia
- 633
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Lightweight and low profile version of an all in one Walksnail Avatar VTX mount. Camera can be adjusted up and down. VTX mounts with screws provided with VTX using the 20x20mm mounting points. Use 3mm screws to mount the pod, or glue/double-sided tape it to plane. Print the Vehicle Fixture and mount it to the plane and then you can easily interchange to other planes.
I printed with ASA since the VTX does get hot and ASA has good UV resistance. Print with .2 layers, 4 walls, 4 top and bottom layers and 15% infill. No supports required.
Vehicle fixture has holes for M3x4mm length threaded inserts.
Check out similar version with camera pan ability.
If you need a compact version try this one.