Topre Tester / Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Fidget to use with your extra Topre compatible parts
Required parts: Topre compatible housing, stem & dome
Optional parts: Compatible keycap, Conical Spring
There are different models listed below. A top and bottom model should be printed for the chosen. After printed dry fit parts, if the fit is too tight lightly file down bottom part. The 1x models are a square so notch orientation does not matter. There are slots on the bottom part for a flat head screwdriver to assist with separating.
Note: The deep models contain an enclosed cavity space weights can be added if you pause the print (wheel weights worked well for me)
Models
- 1x Thin - 1 key, small and light planning on using for magnets
- TinkerCAD Model: https://www.tinkercad.com/things/6vmeG2hFp9u-topretester1xthin
- 1x Deep - 1 key, cavity for weights
- TinkerCAD Model: https://www.tinkercad.com/things/8lPX6LMOng6-topretester1xdeep
- 4x Deep - 4 keys, cavity for weights
- TinkerCAD Model: https://www.tinkercad.com/things/gG9Wn5JYLmc-topretester4xdeep
Thanks to Cipulot for making topre plate generator public which helped with the model cuttouts.