Fuel Additive Bed mount.

This is a magnetic holder for a truck bed to hold fuel additive. It could be used on any magnetically permeable surface and with any bottles that fit. I made the file to use up to 6 magnets but found 4 was more than strong enough. Two would probably work just fine if its on a stable surface. I used .2 layer height with fuzzy skin at .1 for thickness and .4 for point distance. The magnets used are https://www.amazon.com/dp/B0CC5HMKXP?psc=1&ref_=cm_sw_r_cp_ud_ct_9CSMC9E2CFCGY3GPB08Z If you need to use all 6 magnets the middle two will either need the very tip of the included screws clipped off or shorter screws.