1 / 1

Eiffel Tower FDM printable

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Its the Eiffeltower not much to say other than this model can be printed with your glorified gluegun aka FDM printer like a Ender oder Prusa.

Scale	its 220mm, 240mm upscale show be fine
Layerheight	0.2 or 0.3 (photo is 0.3)
Perimeter	2 or more
Infill	does not really matter, i left is as 10% Gyroid
top layer	0.6mm+ so 2 for 0.3mm or 3 for 0.2 layer height
bottom layer	same as top, but more wont hurt
Supports	none, but a 5mm brim helps if you have warping

remove the brim, if any, with a hobby knive or deburring tool
remove fine stringing with pulsing a small torch (like the this used for Crème brûlée)
torch the large arc's and push it in if you have weak cooling.

If your Extruder sucks, buy one from a reputable China vendor like

(They have better Extruder, but these require custom print heads and only work as direct drive)

Or feel free to buy from local 3d Vendors (see voron Discord), Amazon may not be the best place.