Modular photo frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular frame with different configuration possibilities.
- Ocena
- 4,8 / 5
- Polubienia
- 55
- Pobrania
- 209
- Wydruki
- 5
- Wyświetlenia
- 775
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE (05/11/2025)
New size available! Everything is sorted in folders with name and unit measure. And there is also a hook model, so you can hang them on a wall!
The internal and external pins are the same for every size.
Important: there is no possibility to use different size togheter, due to the different pin spacing. Stay tuned, because before the end of the year I will probably publish a universal joint system, so you can mix every size you want!
Available sizes:
- 9x14 (cm)
- 10x15 (cm)
- 13x18 (cm)
- 88x54 (mm)
- 2x3 (inches)
UPDATE (01/07/2025)
Thanks to @3D_much now there is also a fantastic nail hook! You can find the file here:
DESCRIPTION
Modular frame with different assembly possibilities for 10 cm x 15 cm photos. The pictures show a finished example and a screenshot of some possible connection methods.
WARNING:
- I did not print the rear photo holder but used 3 mm MDF panels instead. You can try printing it to see if it works, but I cannot guarantee proper functionality for this piece. The rest of the pieces works great
- Internal and external pins are different. Internal pins are slightly deeper than the external
- I uploaded also a single pin to check the tolerance. It is very tight, but I think it's better to avoid a loose fit