Titan extruder bowden mount on 8mm (threaded) rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple mount for the Titan extruder in bowden. I wanted to mount it on a 8mm threaded rod. So I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a very simple mount for the Titan extruder in bowden. I wanted to mount it on a 8mm threaded rod. So I designed this. It uses the mount support supplied with the titan (at least mine, which is a chinese clone). Please, check that your mount support has 30mm between holes axis.
Print 2 copies of it, tap the small 2,5mm holes in M3 and then screw it.
You'll need: 4 x M4 screw with nuts to fix it, and 2 x small M3 screw to block it in rotation.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.2
Infill:
100%
Notes:
Take care to configure your slicer to fill the small holes (with either thin wall extrusion or fill gaps mode).
Category: 3D Printer Parts