Overengineered Fellow Ode Gen 2 Bellows (PETG + TPU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Probably oveengineered, but really neat bellows that requires you to print PETG + TPU in one print
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 376
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
This is likely over the top thing, but if you like challenges, read on!
Note: My first ever print of this model is in an office environment for a year already, and still works lika charm! So don't be affraid to try it!
Printing instructions:
First, print the Anti Bend Template (any material).
Then, create multimaterial project for the main bellows.
Requires PETG base (0-3mm), then TPU bellows (3-33mm), finished by PETG (33mm and above).
After the TPU part is printed, before you print the top rim, insert the Anti Bend Template inside your print - if you don't, the PETG shrinkage is sufficient to bend your TPU bellows below it.
I provide gcode which works for single extruder (no MMU) and asks you to change fillament at the right times.
I printed with Recreus FilaFlex (82A Shore hardness). This is definitely sufficiently flexible, you might have success even with more stiff filaments, which might be easier to work with.
Original Onshape project here.