NATO Accessory Rail and attachments for a Blowgun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm posting rails and attachments for my son's Cold Steel Big Bore blowgun.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I'm posting rails and attachments for my son's Cold Steel Big Bore blowgun. The first piece is a double-sided NATO Accessory Rail ( STANAG 4694 ).
The rails were created using an OpenJSCAD port of the OpenSCAD code from https://www.thingiverse.com/thing:2801254
More parts to come!
Print instructions
For the rails, turned it 90 degrees to put the wider side block down and the split in the tube at the top. I needed to increase the overhang threshold to 60 degrees so the rails would be properly supported during the early stages of printing. There may be a better way to this print, more testing needed.