Tiered Cupcake Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three-tier stand to hold twelve cupcakes.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Three-tier stand with recessed compartments for twelve cupcakes. Bottom shelf holds five cupcakes, middle shelf holds four, top shelf holds three. The pieces screw into each other via threading, so you can easily design your own cap/handle to screw into the top if you want a different design. I've included a blank cap as well as the one I used with a sunflower on it, but you could customise however you like, make it more obviously a handle… whatever!
Cupcake recesses are 70mm in diameter, so should fit a decent sized cupcake easily. I wanted to have over half the cupcake case coming out the top so that the cupcakes can be easily picked up, but it would be simple enough to recess deeper.
Requires a 250mm build plate as the bottom tier is 240mm diameter - or you could scale if you make mini cupcakes :)
Printed with 15% infill and 3 walls and it can take the weight of a dozen iced cupcakes no problem. Note that tolerances are TIGHT to ensure no wobbles, so this works best on a well-calibrated printer.