1 / 3
Lock ring for Surtep double bowl with 500ml water dispenser — zdjęcie 1
1 / 3

Lock ring for Surtep double bowl with 500ml water dispenser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If your pet tends to rip off the water cover and splash everywhere.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

This model can be printed without support.

It is easily removable but a small adjustment needs to be done to the bowl to keep the lock ring in place.

You have to drill 3x 5mm holes to the side of the bowl. Each hole has to be 10mm from top edge of the bowl. Please take a look on the picture.

I printed it with PETG for more flexibility.
 

Tagi