1 / 5
Neues Reglergehäuse für Heizregler Velleman K8800 — zdjęcie 1
1 / 5

Neues Reglergehäuse für Heizregler Velleman K8800

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrade für mein Projekt Heizbettregelung https://www.thingiverse.com/thing:3430150 Mich hat immer gestört, das der…

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Upgrade für mein Projekt Heizbettregelung

https://www.thingiverse.com/thing:3430150

Mich hat immer gestört, das der Regler extern auf dem Tisch stand.
Nun habe ich das Gehäuse geändert, so das der Regler fest am Drucker montiert ist.
Obendrein sind die Netzteile auch am Drucker montiert, damit der Drucker als feste Einheit
umgesetzt werden kann (keine Kabelschlacht mehr auf dem Tisch, nur noch ein Netzkabel ;-) )
Dazu habe ich das Gehäuse mit meinen Montageklammern an den Aluprofilen befestigt.

Klammern unter: https://www.thingiverse.com/thing:4717532

Genauere Beschreibung zum Umbau unter Projekt Heizbettregelung....

Gewinde sind mit Messingbuchsen M3 und M4 ausgeführt.

Upgrade for my heating bed control project
https://www.thingiverse.com/thing:3430150

It always bothered me that the controller was on the table externally.
Now I have changed the housing so that the controller is firmly attached to the printer.
On top of that, the power supplies are also mounted on the printer so that the printer is a fixed unit
can be implemented (no more cable duct on the table, only one power cord ;-))
To do this, I attached the housing to the aluminum profiles with my mounting brackets.
Brackets at: https://www.thingiverse.com/thing:4717532
More detailed description of the conversion under project heating bed control ...

Threads are made with brass sockets M3 and M4.

Print Settings

Printer Brand:

Velleman

Printer:

K8600

Rafts:

No

Supports:

No

Resolution:

0,1 mm

Infill:

40


Filament:

OWL PLA Div.

Category: 3D Printer Parts

Tagi