Montageklammern für Vertex K8800 Rahmenprofil
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Montage Klammer für den Vertex K8800 zur beliebigen Befestigung von Anbauteilen. z.B Netzteil, Octoprint PI, PI-…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Montage Klammer für den Vertex K8800 zur beliebigen Befestigung von Anbauteilen.
z.B Netzteil, Octoprint PI, PI-Kamera, Werkzeughalter, Seitenwänden einer Druckereinhausung ...
Zwei Versionen, einmal für Gewindeeinsätze und eine zweite für Muttern.
Wenn Gewindeeinsätze verwendet werden, sollte die Wandung ausreichend dick gewählt werden, ich habe mit 4Lagen =1,6mm Wanddicke gedruckt, damit die Einsätze genügend halt bekommen.
GE M3 für M3 Gewindeeinsätze
GE M4 für M4 Gewindeeinsätze
GE M5 für M5 Gewindeeinsätze
alle mit 6 montagelöchern.
Hab noch einen Halter für das Vertex-Netzteil angehängt, der Montagelochabstand beträgt 30mm, darum dafür einen der 6_Lochhalter verwenden !
Mounting bracket for the Vertex K8800 for any attachment of attachments.
e.g. power supply unit, Octoprint PI, PI camera, tool holder, side walls of a printer housing ...
Two versions, one for threaded inserts and a second for nuts.
If threaded inserts are used, the wall should be sufficiently thick, I printed with 4 layers = 1.6mm wall thickness, so that the inserts get enough hold.
Print Settings
Printer Brand:
Velleman
Printer:
K8800
No
Supports:
Yes
0.2
Infill:
20%
Filament:
OWL PLA Melonengelb
Category: 3D Printer Parts