X-Cover for Anycubic Vyper (FreeCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shortened left cover for the X-axis of the Anycubic Vyper. The redesign was needed for my Direct Drive Extruder.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
A new designed left cover for the X-axis of the Anycubic Vyper. The redesign was necessary for my Direct Drive Extruder-holder because it collided with the original cover. This cover is shorter to the right than the original one and has some wider openings on the right side.
This model can also be used to replace the original cover to get a new look of the printer. I put the FreeCAD-file in this model distribution so anyone can modify the part. In FreeCAD there is a spreadsheet-table named “par” to modify some parameters.
This cover uses the original fastening-holes and the original self-tapping screw.
I printed it upside-down with 0,2mm LH. I used Eryone PLA matte blue, it pairs nicely (enough for me) with the original covers.