1 / 5
Gehäuse für Fernbedienung Chamberlain Garagentoröffner 4335EML — zdjęcie 1
1 / 5

Gehäuse für Fernbedienung Chamberlain Garagentoröffner 4335EML

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gehäuse für die Funkfernbedienung am Chamberlain Garagentor. Ist für die alte Version mit 433 Mhz, ob es für neueren…

Ocena
0 / 5
Polubienia
2
Pobrania
40
Wydruki
0
Wyświetlenia
424
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Gehäuse für die Funkfernbedienung am Chamberlain Garagentor.

Ist für die alte Version mit 433 Mhz, ob es für neueren Versionen passt kann ich nicht sagen.
Wenn ja, dann bitte Rückinfo ;-)

Die Knöpfe sollten vor der Montage noch ein wenig angepasst werden, indem der Pin gekürzt wird, damit die Taster sauber schalten.

Das Gehäuse wird nach der Fertigmontage noch mit einer Schraube gesichert.
Die Bohrung ist mit 2mm vorgesehen, sodass hier eine selbstschneidende Schraube oder alternativ eine M3 Senkschraube genommer werden kann.

Housing for the radio remote control on the Chamberlain garage door.

Is for the old version with 433 Mhz, if it fits for newer versions I can not say.
If yes, then please return info ;-)

The buttons should be adjusted slightly before assembly by shortening the pin so that the buttons switch clean.

The housing is still secured with a screw after final assembly.
The hole is provided with 2mm, so that here a self-tapping screw or alternatively a M3 countersunk screw can be taken.

Print Settings

Printer Brand:

Deltaprintr

Printer:

Deltaprintr Kit

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.1

Infill:

30%


Filament:

OWL PLA Black, Mellonyellow

Category: Other

Tagi