1 / 12
Option-O LAGOM casa 58mm portafilter holder — zdjęcie 1
1 / 12

Option-O LAGOM casa 58mm portafilter holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic stand for an Option-O LAGOM casa coffee grinder that holds a Profitec 58mm bottomless portafilter

Ocena
5 / 5
Polubienia
14
Pobrania
189
Wydruki
0
Wyświetlenia
1670
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

March 17 update: I've uploaded a reworked base design that I think is more aesthetically pleasing. See the first two photos in the image carousel. 

You can now build a holder to your preferences:

  • more appealing Mark 2 base
  • original Mark 1 base that offers more portafilter stability
  • curved stand
  • slim stand

--

This model allows me to grind coffee directly from my new Option-O LAGOM casa into a 58mm Profitec bottomless portafilter. It is held in place by a single magnet and is easily removable so you can grind into the standard catch cup.

The design is specific to my portafilter, which has a straight handle and 2 tabs. I do not own other portafilters and cannot create or test other variants. 

I have tested the model with a 29mm tall Normcore dosing ring and a ~15mm tall watchget ring. With 18g of beans ground at a 0.6.5 setting, the grinds fall close to the center of the basket and do not overflow either ring. The static retention around the exit chute is low. 

--

I printed with a 0.4 nozzle and PLA. 

  • 0.20mm Quality print setting
  • 25% rectilinear fill
  • 3 perimeters
  • Supports are needed for the magnet hole only; I was able to print the semi-circle cutout on the stand without supports

--

The only hardware needed is a single magnet. I found mine at a local Ace Hardware: Magnet Source .118 in. L X .472 in. W Silver Super Disc Magnets 4.3 lb. pull 6 pc. You should be able to add fill and negative shapes in your slicer to accommodate other sizes of magnet.

With the  magnet press fit or glued in, the entire holder can be easily slid off when you want to grind into the Casa catch cup.

Tagi