1 / 7
Simagic P-HPR to Racewerk S1 pedal console
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for pedal.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
You will need two M6 bolts (30mm) and nuts per pedal.
I hope the pedal's milled design hasn't changed during production, and that the special pattern fits other models as well, it just fits a little tight at first.
v2: When printing from PETG, the screw nut seat cracked when tightening the screws, so it was thickened there.
