Cuisinart Supreme Grind Burr mill insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an insert for the Supreme Grind mill. It allows for the direct fill of the Moka Pot filter cone.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an insert for the Supreme Grind mill. It allows for the direct fill of the Moka Pot filter cone. I used fusion 360 to model this. For my purposes I designed based on a 62.05mm diameter filter, (maximum) for the grinder receptacle. This model fits loosely in the machine receptacle and allows approximately 90-95% of the grounds to be directed more towards filling the filter cone. The rest drops into the bottom as per usual. Printed using Sunlu PETG on my Anycubic Kobra Plus. (14.09m filament, 3 hours 9 min my settings) as this is just an insert you could print in PLA just fine.
Note: print face down (no supports needed)