Magpush (Magpul) Remix of the Mossberg 500 Forend 6 3/4 Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Magpush forend by Cursd so that it fits a Mossberg 500 6 3/4 tube magazine.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 526
- Wydruki
- 1
- Wyświetlenia
- 2138
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I really wanted to print my own Magpul forend for my Mossberg 500. Unfortunately, my tube was the shorter 6 ¾" length which meant I needed to purchase an adapter or a whole new longer tube. I decided to remix the Magpush by Cursd using the internals of the original wood forend that came with the Mossberg (GOFCartographer produced this quite faithfully). Hence, this hybrid was born.
Material: ASA (ABS, PLA, and PETG will also work, but ASA is less prone to warping in the heat and can withstand UV damage)
Brand/color: Polymaker/olive brown (VERY close to FDE)
Strength: I printed this as a solid piece, but you can probably get away with at least 3 walls and 25% infill.
Orientation: already set
Supports: yes
Printed on a Voron 2.4 300mm