Arrma 6s Steering Stiffener Insert (Kraton / Mojave / Typhon / Fireteam )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was a little unhappy at the somewhat sloppy servo saver on my Arrma Fireteam, and the design of the bellcrank…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I was a little unhappy at the somewhat sloppy servo saver on my Arrma Fireteam, and the design of the bellcrank prevents you from simply tightening it.
Thus, I made these spacers which fit between the factory metal washers and drastically improve steering response. I used a 2mm spacer and placed it between the two factory washers (which are 1mm in height), which seems like a good balance between durability and handling. I've included sizes from 1mm to 8mm so you can tune the steering exactly how you want it.
Fits - All Arrma 6s models with #ARA340187 servo saver parts OD - 18mm ID - 12.75mm
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Pro
No
Supports:
No
0.16
Infill:
100
Category: R/C Vehicles