1 / 2
CORE One Purge/Trash Bin - Remix for 5x3mm magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In-chamber trash bin for CORE One remixed to take 5x3mm magnets
- Ocena
- 4,75 / 5
- Polubienia
- 11
- Pobrania
- 102
- Wydruki
- 5
- Wyświetlenia
- 637
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (38)Powiązane
Trash bin that goes in the CORE One chamber to hold purge lines and other small bits of material.
This version has four 5.2 mm x 3.1 mm holes near the corner of the bin area. 5x3 magnets fit fine but should be glued in for good measure.