CR10S Pro S Screen blanking and Pi Zero Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This panel blanks the screen opening on the CR10S Pro case and has mounting bosses for a Raspberry Pi Zero.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model allows you to remove the screen on the CR10S Pro and Pro V2 and blank off the hole. On the back it has mounting bosses for a Raspberry Pi Zero.
The FreeCAD file used to create it is included. To change the mounting holes, edit the unhidden sketch “Holes_Skt” near the top of the model tree. If you are using 2.5mm screws, you may need to tighten up the 2.4mm dimension.
If you want to shift the mainboard and run the usb directly to it, check out my mainboard shifting part.
Are you having random WiFi disconnects, huge lag issues when connecting via SSH or poor webcam performance from your Pi Zero 2W?
Check out my notes on how to fix them. https://github.com/avongil/PiZero_Bookworm_Notes
If you find that doc helpful please let me know!