1 / 3
CREALITY K1C HONEYCOMB STORAGE WALL (STANDARD) for Geared Door Hinges
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This update makes it possible to use of left panels 2 and 3 v2 together with Geared Door Hinges.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 1431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (51)Powiązane
- Print all v2 panels you need except LEFT_HONEYCOMB_2_V2.stl and LEFT_HONEYCOMB_3_V2.stl (those were modified).
- Print attached LEFT_HONEYCOMB_2_V2_for_hinge.stl and LEFT_HONEYCOMB_3_V2_for_hinge.stl STLs using print settings as you used to print original panels.
- Print 270º door hinges as you need using suitable material and print settings.
- Mount all panels according to original description for for honeycomb wall, using modified panels 2 and 3 over door hinges using four M3x14 bolts instead of M3x10.
IMPORTANT: Model is in testing phase yet.