1 / 3
Speed Adjuster Cover Little Pro Rider 16
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick cover to prevent child from adjusting bikes speed whilst they are learning.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Needed a way to prevent my 3 year old from increasing the speed of his e-moto whilst he is learning. Quick cover which picks up original mounting hole. I can still adjust the speed using a small screw driver to slide the dial around without removing it.
Tested on Little Pro Rider 16" V4, looks like it would work on the 12" model too.
0.2 Layer Height
15 % Infill
Print flat on build plate with supports
Prototype is PLA will re print in PETG