Rugged EPIPEN Holder Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview:
An EPIPEN holder I made for a family member, based on a screwdriver holder. The original model had his name on it, so this is a slightly revised version with the name removed for obvious reasons.
I included a blank lid if you want an easier print, and don't want to fuss with color changes (or if you prefer a more “low-profile” carry case)
If you want the lettering and crosses, the only downside is you'll need to print it with the top of the lid facing upwards, and you'll need a good deal of support material.
The bottom section requires nothing special, just print as-is.
Print Settings:
Infill: 100%
Brim: Yes
Supports: Yes for lid if you're printing upwards for lettering, no for lid if printing upside down with the blank lid, and the bottom does not need supports.
Layer Height: 0.16mm
Material: I used Polymaker PLA Pro but you could reasonable use whatever works for you.