1 / 4
Over-Travel Butt Hinge (parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified butt hinge that permits over-travel, allowing connected boards to drop up to 45° below flat.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A face-mounted butt hinge that allows over-travel, enabling one or both connected boards to drop up to 45° below flat. Secured with side-facing screws, it is ideal for collapsible structures, fold-out surfaces, and applications requiring extended motion beyond traditional hinges.
The base model has a slight lip to help positioning on the edge of the board.
The included STL file has a few parameters in front, which allow customization. The main ones are:
stepdetermines how long each separate barrel will be in mm. 10 is reasonable but if you need a very narrow hinge, you may go much shorter.stepshow many barrels (or “teeth”) there should be. Minimum is 1, 2 are better, more than 4 is probably overkill unless you go specifically for a piano hinge. The total length of the hinge is determined bystep * steps * 2.angleonly tested for 45 ° but you may experiment.
The hinge is joined by raw filament.