1 / 4
Dual 5015 Fan Duct for Kobra Neo (Titan Aero) – Fits E3D & Volcano — zdjęcie 1
1 / 4

Dual 5015 Fan Duct for Kobra Neo (Titan Aero) – Fits E3D & Volcano

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

WIP dual 5015 fan duct for Kobra Neo (Titan Aero). Fits E3D & Volcano, adjustable height, minimal supports needed!

Ocena
5 / 5
Polubienia
7
Pobrania
48
Wydruki
1
Wyświetlenia
348
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hey everyone! This is a dual 5015 fan duct designed for the Anycubic Kobra Neo with a Titan Aero extruder. It features a wide range of height adjustment, making it compatible with both standard E3D hotends and Volcano setups (Volcano requires a separate adjustable endstop flag).

The duct comes in two parts, connected with an M3 nut and bolt for easy assembly. It also includes a 7mm endoscope camera slot for improved print monitoring.

Most of the design prints without supports, thanks to carefully managed angles, but tree supports are recommended in crucial areas. This is still a work in progress, so feel free to share any feedback or improvements! It’s a little janky, but it works! 😆

if you decide to mount it along with a volcano hot end, other than extended endstop flag, you will need to move your abl sensor closer to the bed, i didnt bother with any mounts since stock kobra extruder mount has a perfect hole for ziptie. just make sure to use ABL calibration gauge that came with your printer or this one made by Thumquas

 

 

 

Let me know if you have any questions or suggestions!

Tagi