Ogre / Troll (50mm) (DND / TTRPG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An ogre or troll model for DND and other TTRPGs
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
I have this labelled as an Ogre but it could easily be a troll. If scaled down to 32mm it could be an orc or even a ghoul pretty easily.
This model took me forever because I was playing with auto-rig pro. I started with sort of an A-pose and then positioned him into this lunge / grasp. I kept the finger count down for chonkier fingers but could have made the hands bigger for the extra digit. Initially I had planned to have a variety of poses here but I was still learning how to save poses, apply parents etc.. etc.. I also added a loincloth and was trying to figure out the best way to have cloth textures with limited success. Eventually I decided this model was taking too much time so I've put a pin in it for now to move onto others and roll my leanings over there. Overall I'm happy with the model and it's a bit more of a dynamic pose than most of the other stuff that I've done so far.
For FDM printing, as usual print on its back - I printed at 0.15 layer height and 30 infill which seems to be fine on these larger models.
Category: Other