Air Stripper for air rifles.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on the Air Arms MPR air stripper, threaded with 1/2" unf. All of my rifles are.177/4.5mm so this is designed…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
My take on the Air Arms MPR air stripper, threaded with 1/2" unf. All of my rifles are .177/4.5mm so this is designed for them, but you can alter the calibre to .22 or .25.
There is also two 3mm holes for grub screws if required.
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 3
Yes
Supports:
Yes
.20
Infill:
35 - 55%
Notes:
Print muzzle end down with threads pointing up.
Wanted one, couldn't buy one, so designed one.
My version of the Air Arms MPR muzzle brake/air stripper, after seeing in action and taking basic measurements decided to design on Tinkercad.
Category: Sport & Outdoors