1 / 1
90° Vertical PTFE Tube corner for 30x30 Extrusions
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Run your PTFE in a 90° turn at a 30x30 Extrusion
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I am expanding my RatRig V-Core with a MMU and for that I need to route the PTFE tube differently than before.
With the kit came a 90° turn that was flat on a 30x30 extrusion, however I now need to route the tube perpendicular to that.
This simple print allows you to stick a 4mm outer diameter PTFE tube in it and around the bend and screw the whole thing on your 30x30 extrusion with a regular M6x10 screw.