Carvera Back Panel Isolation 3d Prints and Back Panel Fusion file for CNC cutting it.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D print to compliment the Carvera Back Panel Isolation modifications.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a modification of the lower parts and vacuum manifolds for the Carvera Back Panel Isolation Mod by Fae Corrigan. You will still need the upper parts from Fae's mod located at https://www.printables.com/model/873426-carvera-back-panel-isolation-3d-prints with instructions at https://www.instructables.com/Carvera-Makera-Back-Panel-Isolation-Install-Instru/
This modification eliminates the internal vacuum parts and frees up space to add a 120mm fan for better ventilation, there is also a Back Panel STL file for use in the CNC to cut the aluminimum back plane for 120mm fan, ventilation, lower panel screw hole mounting locations and a larger Vacuum outlet. You can choose what parts you want to cut and what not to from that STL file.
I have included the Fusion 360 file if you choose to change or modify any of the parts provided in this remix.
You will need 3mm heat set inserts of 4mm and 6mm lengths along with 3mm flat head screws in 4mm, 6mm and 10mm lengths to complete this modification.