1 / 7
Kobra S1 Right Sided Poop Shoot & Basket — zdjęcie 1
1 / 7

Kobra S1 Right Sided Poop Shoot & Basket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Poop Shoot/Slide With Waste Bin For Anycubic Kobra S1 V2 added winder, larger opening, more slope

Ocena
0 / 5
Polubienia
47
Pobrania
702
Wydruki
2
Wyświetlenia
2883
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

V2 added which is 10mm winder, larger opening at top exposing the printers exit shoot allowing larger poop to slide through and 3 degree more slope giving it about 14mm downwards angle

With version 2 being lower you’ll either have to print the anti vibration feet I made as well, cut the original basket or print a new basket about 25mm less taller
 

I looked everywhere and without luck i couldn't find a right sided poop shoot and basket for my kobra S1, two days work this is the result.
The shoot/slide only needs support on the bottom not the top where it has double screws, the 3 locations where it screws to the printer uses factory screws so no extras are needed in the mounting.
This will fit on the Anycubic Kobra S1 so no need to run to a larger printer.

 

Tagi