Arch Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to try and make arch supports. I have very flat feet and wanted something I could make myself. These were…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to try and make arch supports. I have very flat feet and wanted something I could make myself. These were printed in TPU to be flexible. I put them UNDER my insoles and used carpet tape to keep them from shifting. No guarantees for these USE AT YOUR OWN RISK. They were printed at 10% infill with 1mm top layer (maybe should be more since it left openings.) These are less than 6mm at the highest and about 1mm at the low end.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
**Rafts:**
No
Supports:
No
**Resolution:**
0.125
Infill:
10
**Filament:** MatterHackers TPU Black
Category: Other