Samsung HW-Q930D rear speakers support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a support for the Rear Speakers of the Samsung soundbar HW-[Q930B/C/D],[Q990B/C/D],[Q995B/C/D]
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 710
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This support allows the speaker to rotate about 45° to the right or left. I designed it specifically for my HW-Q930D, but it should also be compatible with:
- Q930B
- Q930C
- Q930D
- Q990B
- Q990C
- Q990D
- Q995B
- Q995C
- Q995D
- Possibly others as well.
The 3D model was created in FreeCAD and is available for modification.
For best results, the speaker mount should ideally be printed sideways rather than standing upright to improve structural solidity. However, printing a perfect cylinder this way can be more challenging. Mine seems solid enough despite this.
That said, the speaker is quite heavy, and the mount bends just a little with a 15% infill. If needed, you can modify the 3D model to increase structural strength or increase infill.