1 / 4
Makar the Korok from The Legend of Zelda - The Wind Waker — zdjęcie 1
1 / 4

Makar the Korok from The Legend of Zelda - The Wind Waker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model is of a Korok named Makar from the game The Legend of Zelda - The Wind Waker

Ocena
0 / 5
Polubienia
18
Pobrania
50
Wydruki
0
Wyświetlenia
430
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This model is of a Korok named Makar from the game The Legend of Zelda - The Wind Waker. Daughter wanted me to make her an Makar Amiibo and of course everyone wants to charge for him but luckily I found this model by  Jaspreet Singh on Sketchfab (So please check out his designs as well!) and it even looks way better than the ones that wanted to charge for it I think! 

Being original is an animated 3D object, using Blender, was able to separate the face and body and export to parts to STL. I then cut the body on the Y plane to make printing easier.

Printing the body was easier for me than the face, I used woodgrain which is a pain in the %$# but I like the look with the Koroks, but using PLA/PETG should be pretty simple and issue free. The face on the other hand, was a chore and took several attempts to be successful trying different support options etc. I finally ended up tilting the face and switching to PETG and setting speeds to about 40% across the board and finally got it!! There was quite a bit of support attached but recently learned a trick about setting the top/bottom interface setting to “1” & top/bottom Z distance setting to .28 on both helps break off easier and they did (I included a screenshot of the support settings I used)!!

After printing, I simply filed/sanded and glued parts together and voila! Since she wants an Amiibo, I attached mine to a Amiibo base but that is separate and not part of this project.

I am new to this and I looked but didnt find a better way to do it so if anyone has suggestions on how I could have handled printing the mask better, let me know. 

 

So best of luck and enjoy!

 

 

Tagi