1 / 2
Purdue P Cribbage Board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Files include:
- The cribbage board
- A small segment to test settings and verify the fit of your pegs
- A wall hanger meant to use a 3M strip
Note: The model in the image accidentally has 6 holes in the second to last segment. This has been fixed in the version of the file I uploaded.
The board can fit on a 250x250mm build plate if rotated 70 degrees
The model is intended to be printed with 3 or 4 color changes between layers at the following heights: 16.2mm, 16.8mm, 17.4mm. I did an extra change at 15.6mm from black to white so the majority of the print is black.
Here are the pegs I ordered: https://a.co/d/fLHLFOm
If using other pegs, I suggest printing the test piece and scaling the board if needed so your pegs fit.