Strawberry Planter (for Vase Mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strawberry planter with 10 multi-level tiered openings, designed specifically for printing in Vase or Spiralized mode.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a strawberry planter pot with multi-level tiered openings, 10 in total counting the top.
Designed specifically for printing in Vase or Spiralized mode.
To print this, you must enable Vase Mode or Spiralize Outer Contour mode.
To increase strength, I recommend setting Outer Wall Width to .8
Should fit within a 220x220 print bed, but may need to be rotated or scaled to your needs.
Also, at least in Cura, to ensure the drainage hole prints right, while using vase mode, set the bottom layers' thickness to 1mm, so 5 layers at 0.2mm layer height.
The _fix version fixes a bit of a misalignment in the smoothness of the sides. Wasn't a huge deal, but my OCD made me fix it. heh
Latest version: v2_wh makes the side holes slightly wider, and also includes the previous fix.