Universal Bag Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-place Bag clip -six sizes- 100mm-200mm
- Ocena
- 4,222 / 5
- Polubienia
- 1196
- Pobrania
- 3921
- Wydruki
- 17
- Wyświetlenia
- 12 185
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal Closing Clip for bags and packaging, suitable for closing ground coffee, powdered cream, cappuccino.
There are more pocket clips on this page, you can try mine to see if it's right for you!
I used the joint from a proven cable clamp model and made it into a Clip for bags. The Clip clicks quite firmly - so that the bag does not open, you need to press a little harder on the protrusions on the Clip when opening
I added auxiliary plates for 1 print layer to the clip models, because when printing prototypes they lifted up from the print bed - the models are long and there is a risk of material contraction. It was no problem with the plates. You can easily break them off after printing.
Try Clips, if you have an idea for any improvement, or want a different length, write to me
Models with similar joint system:
Cable clip Prin-in-place
https://www.printables.com/model/1183330-cable-clip-prin-in-place
Openable cable clip Print-in-place :
https://www.printables.com/model/1183338-openable-cable-clip-print-in-place